Leading Manufacturer of electronic spices tp4056 micro usb type c 5v 1a 18650 lithium battery charging protection board, electronic spices power bank boost step up module dual usb charging circuit board pcb board, electronic spices 134n3p, t6845-c 5v micro usb diy power bank charging module circuit board, electronic spices power bank charger board charging circuit pcb board, electronic spices 2usb power bank charging module circuit board step up boost power supply module and electronic spices display usb 5v output power bank battery charger protection pcb module board from New Delhi.
Electronic Spices TP4056 Micro USB Type C 5V 1A 18650 Lithium Battery Charging Protection Board
Get Best Quote
Product Price: Rs 30 / PieceGet Best Price
Minimum Order Quantity: 100 Piece
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
FR 4 Glass
Thickness
1MM
Usage/Application
Industrial
Type Of Tension
DC
Battery overcurrent protection current: 3A
The input voltage: 4.35-6 v (recommended voltage 5 v)
The board size: about 2.5 * 1.65 CM
1PCS X Type-C USB TP4056 Lithium Battery Charger Module
Battery over-discharge protection voltage: 2.5V
power bank board/ power bank motherboard/ power bank pcb/ tp4056 lithium ion battery charger/ tp4056 lithium ion battery charger module/ tp4056 battery charging module
Additional Information:
Item Code: MODULE-TYPEC
Production Capacity: 1000
Delivery Time: 2-5 DAYS
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Electronic Spices Power Bank Boost Step Up Module Dual USB Charging Circuit Board PCB Board
Get Best Quote
Product Price: Rs 144 / PieceGet Best Price
Minimum Order Quantity: 100 Piece
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
FR 4 Glass
Thickness
3 mm
Usage/Application
Industrial
Type Of Tension
DC
Specification: Input interface: V8 port, micro USB (fit for android port, flat port) Dual USB output: 5V/1A/2A Conversion rate: 85% on average Main board size (thick*width* length): 8 * 32 * 69mm / 0.3 * 1.3 * 2.7in Installation Instructions: B- on the circuit board for the battery negative pole, B + for the positive pole, do not connect the reverse, the connection must burn board, the battery for parallel welding, the assembly of the battery, should pay attention to the insulation between the battery and the circuit board, the battery leads do not touch the circuit board, in order to avoid short circuit, the collision of electricity leads to the final failure!
power bank board/ power bank motherboard/ power bank pcb/ 2 usb power bank pcb/ 2 usb power bank pcb/ power bank module
Additional Information:
Production Capacity: 1000
Delivery Time: 2-5 DAYS
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Electronic Spices 134n3p, t6845-c 5V Micro USB DIY Power Bank Charging Module Circuit Board
Get Best Quote
Product Price: Rs 28 / PieceGet Best Price
Minimum Order Quantity: 100 Piece
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
fr4
Usage/Application
Industrial
Type Of Tension
DC
input Voltage: 3.7V-5.5V. Output Voltage and Current: 5V 1A.
Wide Usage: Applicable to manifold batteries such as Polymer, 18650 Lithium, Mobile Phone and Tablet Battery etc…
Integrated protect functions: Output overvoltage, overload, short circuit, over-charge/discharge protections. Temperature control and over-temperature protection.
power bank board/power bank module circuit board/power bank pcb/ power bank board
Additional Information:
Item Code: POWERBANK-134N3P
Production Capacity: 1000
Delivery Time: 2-5 DAYS
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Electronic Spices Power Bank Charger Board Charging Circuit PCB Board
Get Best Quote
Product Price: Rs 32 / PieceGet Best Price
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
FR 4 Glass
Thickness
1MM
Usage/Application
Industrial
Type Of Tension
DC
Apply Battery Type:18650 battery(not include)
Output Voltage:5V/1A
Input Voltage:3.2V-4.2V
The battery positive should connect B+
The battery negative should connect GND
power bank board/ power bank motherboard/ power bank pcb/ 1 usb power bank pcb/ 1 usb power bank pcb/ power bank module
Additional Information:
Item Code: CHRGINGMODULE-1USB
Production Capacity: 1000
Delivery Time: 2-5 DAYS
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Electronic Spices 2USB Power Bank Charging Module Circuit Board Step Up Boost Power Supply Module
Get Best Quote
Product Price: Rs 34 / PieceGet Best Price
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
FR 4 Glass
Thickness
3 mm
Usage/Application
Industrial
Type Of Tension
DC
Circuit board B- connects power negative,B+ connects positive. Don't inversely connect,it will result in burning of board.Make sure there is insulation between power and circuit when install the battery 2A output is not continuous current,it changes according to USB connecting load, automatic current output as per power bank board/ power bank motherboard/ power bank pcb/ 2 usb power bank pcb/ 2 usb power bank pcb/ power bank module
Additional Information:
Item Code: 2USB-POWERBANK
Production Capacity: 1000
Delivery Time: 2 - 5 DAYS
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Electronic Spices Display USB 5V Output Power Bank Battery Charger Protection PCB Module Board
Get Best Quote
Product Price: Rs 129 / PieceGet Best Price
Minimum Order Quantity: 100 Piece
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
PLASTIC
Usage/Application
Industrial
Type Of Tension
DC
Marked BAT-, BAT+ on board, positive pole of battery need to connect B+, the pole of negative need to connect B-, DON’T connect reversed, or will burn out. Need insulation between the battery lead and the board, or will short circuit.
Equipped with LED lamp with push button switch control on/off, Board Size: 66 X 18 X 16mm/2.60 X 0.71 X 0.63inch(L*W*H)
On-board blue backlight display the power capacity with 0-100% display range during charge or discharge process
Additional Information:
Item Code: POWERBANK-DISPLAY
Production Capacity: 1000
Delivery Time: 2-5 DAYS
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Electronic Spices 3 USB 5V 1A Mobile Power Bank Charger Step Up Boost Battery Charging Board
Get Best Quote
Product Price: Rs 38 / PieceGet Best Price
Minimum Order Quantity: 100 Piece
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
FR 4 Glass
Usage/Application
Industrial
Type Of Tension
DC
Apply Battery Type: 18650 battery(not include)
Output Voltage: 5V 2.1A Input Voltage: 5V 1A
Instructions: Level 4 Capacity indicator Lighting: with LED lights
Rated Voltage: 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)
power bank board/ power bank motherboard/ power bank pcb/ 3 usb power bank pcb/ 3 usb power bank pcb/ power bank module
This BMS module is commonly use to manage and protect the battery from over charge or discharge. It is very safe and reliable to use. This module provides short circuit protection; overload, discharge and overcharge protection. This little piece of equipment ensure the safety and protection of your battery pack. So that the battery can provide you a long service life. 2S 4A 3.7V 18650 Li-ion Lithium battery protection
The battery protection board adopts a highly integrated intelligent lithium battery protection board integrated chip, and the performance is superior to the protection board composed of discrete chips. Can complete battery charge and discharge protection, over current, short circuit, over temperature protection and equalization function.
This is a battery management system module. It works on the 3A power current. This BMS module is commonly use to manage and protect the battery from over charge or discharge. It is very safe and reliable to use. This module provides short circuit protection; overload, discharge and overcharge protection. This little piece of equipment ensure the safety and protection of your battery pack. So that the battery can provide you a long service life. This module has a low current consumption and provide stable performance. Due to its small size, excellent performance and low cost. This product is suitable to meet a wide range of requirements.
This is a battery management system module. It works on the 25a power current. This BMS module is commonly use to manage and protect the battery from over charge or discharge. It is very safe and reliable to use. This module provides short circuit protection; overload, discharge and overcharge protection. This little piece of equipment ensure the safety and protection of your battery pack. So that the battery can provide you a long service life. This module has a low current consumption and provide stable performance. Due to its small size, excellent performance and low cost. This product is suitable to meet a wide range of requirements.
This is a battery management system module. It works on the 3A power current. This BMS module is commonly use to manage and protect the battery from over charge or discharge. It is very safe and reliable to use. This module provides short circuit protection; overload, discharge and overcharge protection. This little piece of equipment ensure the safety and protection of your battery pack. So that the battery can provide you a long service life. This module has a low current consumption and provide stable performance. Due to its small size, excellent performance and low cost. This product is suitable to meet a wide range of requirements.
Additional Information:
Item Code: BMSJH86750123
Production Capacity: 10,000
Delivery Time: 2 -5 DAYS
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Smart BMS 8-24S 80A Same Port for Charge and Discharge (SP24S007)
Get Best Quote
Product Price: Rs 4,143 / PieceGet Best Price
Minimum Order Quantity: 1000 Piece
Product Details:
Input Charging Voltage (DC)
3.6V
Battery Type
Lithium Battery
Charging Current
100A
Board Type
Single layered
Brand
Jiabaida JBD
Usage/Application
UPS (Uninterruptible Power Supplies)
Number of Cells in Series
24S
The Smart BMS 8-24S 80A Same Port for Charge and Discharge (SP24S007) is a high-performance Battery Management System (BMS) designed for Li-ion and LiFePO4 battery packs ranging from 8 to 24 series cells. It is ideal for applications such as electric vehicles (EVs), solar energy storage systems, backup power solutions, and industrial battery packs.With an 80A continuous charge and discharge capacity, this BMS ensures stable power output while offering comprehensive protection against overcharge, over-discharge, overcurrent, short circuits, and thermal fluctuations. The same-port configuration allows both charging and discharging to occur through a single connection, reducing complexity and making installation more efficient. A key feature of this BMS is its smart active balancing, which ensures uniform voltage across all cells, thereby enhancing battery life, efficiency, and overall performance. Additionally, the integrated monitoring system allows real-time tracking of battery voltage, current, temperature, and status through a mobile app or external communication interfaces. Constructed with high-quality MOSFETs and a durable PCB design, the Smart BMS 8-24S 80A (SP24S007) provides reliable, safe, and efficient battery management, making it a perfect choice for demanding high-power applications.
Features:-
Overcharge protection
Over-discharge protection
Overcurrent protection
Short-circuit protection
Same-Port Operation
Additional Information:
Item Code: ZM9016A
Delivery Time: 2-3days
Yes! I am InterestedRequest A Callback
Smart BMS 10-17S 80A Same Port for Charge and Discharge (SP17S005)
Get Best Quote
Product Price: Rs 2,524 / PieceGet Best Price
Minimum Order Quantity: 1000 Piece
Product Details:
Number of Cells in Series
10S
Input Charging Voltage (DC)
11.1V
Battery Type
Lithium Battery
Charging Current
100A
Board Type
Single layered
The Smart BMS 10-17S 80A Same Port for Charge and Discharge (SP17S005) is a high-efficiency Battery Management System (BMS) designed to support lithium-ion (NMC/LiPo) and LiFePO4 battery packs with configurations ranging from 10S to 17S. With a 80A continuous current capacity, it is well-suited for applications like electric vehicles (EVs), solar energy storage, power backup systems, and industrial battery packs. This BMS features a same-port design, meaning both charging and discharging use a single connection, reducing wiring complexity and improving installation convenience. It provides comprehensive protection against overcharge, over-discharge, overcurrent, short circuits, and excessive temperature, ensuring safe and reliable battery operation.
Features:-
Overcharge protection
Over-discharge protection
Overcurrent protection
Short-circuit protection
Additional Information:
Item Code: ZS9016A
Delivery Time: 2-3 days
Yes! I am InterestedRequest A Callback
8S 20A LFP LiFePO4 BMS 8181A Module
Get Best Quote
Product Price: Rs 473.73 / PieceGet Best Price
Minimum Order Quantity: 1000 Piece
Product Details:
Number of Cells in Series
8S
Input Charging Voltage (DC)
11.1V
Battery Type
Lithium-ion Battery
Board Type
Double layered
Brand
TDT BMS
Usage/Application
Solar Energy Storage Systems
Charging Current
10A
The 8S 10A LFP LiFePO4 BMS 8181A Module is a high-quality Battery Management System (BMS) designed specifically for 8-series (8S) Lithium Iron Phosphate (LiFePO4) battery packs. With a continuous discharge current of 10A, this module is ideal for a wide range of applications, such as solar power storage systems, electric bicycles, UPS systems, and other portable or off-grid power solutions. The 8181A model provides essential battery protection features, including overcharge protection, which prevents the battery from charging beyond its safe voltage range, and over-discharge protection, which ensures the battery is not drained too low, extending its lifespan. The module also offers overcurrent protection to prevent excessive current draw that could damage the battery, and short-circuit protection, which safeguards the system in the event of a short circuit. Additionally, the over-temperature protection monitors the battery's temperature, cutting off power in case of overheating, ensuring safety and efficient operation.
Features:-
Overcharge Protection
Over-Discharge Protection
Overcurrent Protection
Additional Information:
Item Code: XM9403A
Delivery Time: 2-3 days
Yes! I am InterestedRequest A Callback
Electronic Spices Raw Material For Power Bank Set For Diy Set
Get Best Quote
Product Price: Rs 55 / PieceGet Best Price
Minimum Order Quantity: 1000 Piece
Product Brochure
Product Details:
Battery Capacity
AS REQUIRED
Model Name/Number
GR9R798798
Brand
Electronic spices
Number Of USB Ports
3
Battery Type
Lithium
Charging Time
As required
Compatible Device
Mobiles and laptop
Output Voltage
5v 1amp
Color
Black
Input Voltage
3.7v
By following the ongoing market developments and trends, we are offer Mobile Power Bank to our valued clients. The offered power bank is widely appreciated for its ultramodern techniques and longer functional life. Manufactured using premium grade basic material and top notch techniques, the offered array is available in number of designs, sizes and specifications to meet the requirements of clients accordingly.Also these products priced nominally.
Additional Information:
Item Code: 987
Production Capacity: 15000
Delivery Time: G8RR6EG67SG7
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Electronic Spices 5 Pin Female Mini Micro USB to DIP Adapter Connector Module Board
Get Best Quote
Product Price: Rs 6 / PieceGet Best Price
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
fr4
Usage/Application
Industrial
Type Of Tension
DC
Package Include :- 5PSC 5PIN MINI MICRO USBMini Micro USB To DIP 2.54mm AdapterWidely used in electronic product linksMICRO USB to DIP Adapter 5pin female connector B type pcb converter pinboard 2.54power bank board/ย power bank motherboard/ย power bank pcb/ย 3 usb power bank pcb/ย 3 usb power bank pcb/ย power bank module
Additional Information:
Production Capacity: 10000
Delivery Time: 2-5 DAYS
Packaging Details: N/A
Yes! I am InterestedRequest A Callback
Electronic Spices TP 4056 Micro USB Lithium Battery Charging Converter with Overcharge Discharge
Get Best Quote
Product Price: Rs 30 / PieceGet Best Price
Minimum Order Quantity: 500 Piece
Product Brochure
Product Details:
Board Type
Single Sided
Power
5V
Brand
Electronic spices
Material
fr4
Thickness
1mm
Usage/Application
Industrial
Type Of Tension
DC
Charge and Discharge Protection Module, Input Voltage: DC 5V, End-of-Charge Voltage: 4.2V +/- 1%, Max Charge Current: 1000mA
With Micro USB socket at the input port, can directly use the phone charger as input to charge for lithium battery, and keep connection solder joint. Convenient to DIY.
After connecting the lithium battery to B+ and B-, join up 5V input, red light indicates on charge, green light indicates fully charged.
The charging current would be better 0.37 times than battery capacity. (eg. 1000mAH battery charging current is 400mA) Disconnect load while charging, OUT / B output positive and negative reverse connection will damage the module.
power bank board/ power bank motherboard/ power bank pcb/ tp4056 battery charging module/ tp4056 lithium ion battery charger module/tp4056 1a li ion lithium battery
