Call 08048263793 78% Response Rate
Send Email
Minimum Order Quantity: 100 Piece
Product Brochure
| Power | NA |
| Power Source | DC |
| Brand | ELECTRONIC SPICES |
| Board Type | Double sided |
| Copper Thickness | NA |
| Thickness | NA |
| Material | NA |
| Usage/Application | Electronics |
| Mounted Product | NA |
| Layer Count | Double |
Additional Information:
Product Brochure
| Output Type | PNP |
| Supply Voltage | 12 to 24 V DC |
| Switching Mode | NC |
| Number of Wires | 3 Wire |
| Usage/Application | Industrial |
| Connection Type | Cable |
| Body Material | Plastic |
| Body Style | Cylindrical |
| Sensing Distance | 4 mm |
Minimum Order Quantity: 100 Piece
Product Brochure
| Brand | Electronic Spices |
| Model | QS-301 |
| Rate Load Current | 6 A |
| Power Source | 220-240 V AC |
| Power Frequency | 50 Hz |
| Working Temperature | -20 to +40 DegC |
| Number of wires | 3 |
| Working Humidity | <93%RH |
This is a photo-sensitive device. It is used to turn the light automatically when the sun goes down. This device is suitable for automation and getting rid of the switches. The device is smart enough to detect the sunlight and make changes in the lighting system. This device works on low-frequency noise and its smart design also saves electricity. It can use Street lights, Garden Lights, Incandescent lamps, LED lights, etc.
Additional Information:
Minimum Order Quantity: 500 Piece
Product Brochure
| Channels | 1 |
| Input Voltage | 2.5 to 3.6 V DC |
| Interface | IC |
| Response Time | 60 ms |
| Operating Temperature | -40 to +85 deg C |
| Dimensions | 15 x 11 mm |
| Brand | ES |
| Color | Red |
| Model Number | TTP223 |
Ttp223 capacitive touch sensor module. The ttp223 is a touch pad detector ic replicating a single tactile button. This touch detection ic is designed for replacing traditional direct button key with diverse pad size. Features: supports momentary or latching/toggle modes. Supports active high or active low output signal modes. Dimensions: 15mm x 11mm. Input voltage: 2v-5. 5V dc. The response time max ~ 60ms in fast mode, ~220ms at low power mode at vdd=3v. Sensitivity can adjust by the capacitance(0~50pf). Have two kinds of sampling length by pad option(slrftb pin). Stable touching detection of human body for replacing traditional direct switch key. Provides fast mode and low power mode selection by pad option(lpmb pin). Provides direct mode toggle mode by pad option(tog pin). Open drain mode by bonding option, opdo pin is open drain output, q pin is cmos output. All output modes can be selected active high or active low by pad option(ahlb pin). Have the maximum on time 100sec by pad option(motb pin). Have external power on reset pin(rst pin). After power-on have about 0. 5Sec stable-time, during the time do not touch the key pad and the function is disabled. Auto calibration. Re-calibration period is about 4. 0Sec, when key has not be touched.
Additional Information:
Product Brochure
| Sensing Distance | 4m |
| Minimal Range | 2cm |
| Sensor Type | Ultrasonic sensor |
| Item Model Number | HCSR0400112 |
| Model Name/Number | HCRO4004001 |
| Ultrasonic Frequency | 15mA |
| Material | Stainless Steel |
| Maximal Range | 4m |
| Brand | Electronic spices |
| Supply Voltage | DC 5V |
ultrasonic sensor provides an easy method of distance measurement. This sensor is perfect for any number of applications that require you to perform measurements between moving or stationary objects. A single I/O pin is used to trigger an ultrasonic burst (well above human hearing) and then "listen" for the echo return pulse. The sensor measures the time required for the echo return, and returns this value to the microcontroller as a variable-width pulse via the same I/O pin
Additional Information:
Product Brochure
| Model / Part Number | MQ-2 |
| Target gases | NA |
| Measuring Range | NA |
| Operating Voltage | 3 to 5 V |
| Brand | Electronic spices |
| Output Current ( in mA) | 150 mA |
Gas sensors (also known as gas detectors) are electronic devices that detect and identify different types of gasses. They are commonly used to detect toxic or explosive gasses and measure gas concentration. Gas sensors are employed in factories and manufacturing facilities to identify gas leaks, and to detect smoke and carbon monoxide in homes.
Gas sensors vary widely in size (portable and fixed), range, and sensing ability. They are often part of a larger embedded system, such as security systems, and they are normally connected to an audible alarm or interface. Because gas sensors are constantly interacting with air and other gasses, they have to be calibrated more often than many other types of sensors.
MQ2 is one of the commonly used gas sensors in MQ sensor series. It is a Metal Oxide Semiconductor (MOS) type Gas Sensor also known as Chemiresistors as the detection is based upon change of resistance of the sensing material when the Gas comes in contact with the material. Using a simple voltage divider network, concentrations of gas can be detected.
Additional Information:
Product Brochure
| Minimum Order Quantity | 1000 Piece |
| Usage/Application | As required |
| Brand | Electronic spices |
| Model Name/Number | REEDSWICTH0789 |
| Switch Configuration | AS REQUIRED |
| Part Number | 1 |
| Output | As required |
| Power/Voltage | As required |
K1 Mini Reed Switch Sensor SwitchThis glass reed switch is normally open type with size. It has compact size and light weight which can be installed in extremely limited space,very suitable for miniaturization of devices. It doesn't use the sliding element, thus,metal fatigue phenomenon will not appear, ensuring virtually no limit mechanical life. It is suitable for various items ,such as PBX, photocopiers, washing machines, refrigerators, door, window magnetic, electromagnetic relays,etc. This glass reed switch is normally open Type .
Additional Information: