Call 08048263793 66% Response Rate
Send Email
Minimum Order Quantity: 1000 Piece
Product Brochure
| Memory Size | 8 Kbit |
| Brand | Atmel Corporation |
| Package | PDIP-8 (0.300", 7.62mm) |
The AT24C08B-PU is an EEPROM (Electrically Erasable Programmable Read-Only Memory) IC from Microchip Technology, featuring 8Kbits (1024 x 8) of non-volatile memory. Encased in a standard 8-PDIP (Plastic Dual In-line Package), this IC is designed for ease of integration and long-term durability. It operates using an I²C (Inter-Integrated Circuit) serial interface, which supports a clock frequency of up to 1 MHz, enabling high-speed data transfer and communication with microcontrollers and other digital systems. This EEPROM's wide operating voltage range from 1.7V to 5.5V allows it to be used in various power supply environments, making it highly versatile. Its fast access time of 550 nanoseconds ensures quick and reliable data read and write operations, which is essential for applications that require prompt data retrieval and storage.
Features:-
Additional Information:
Minimum Order Quantity: 1000 Piece
| Voltage | 100 V |
| Maximum Power Dissipation | 73 W |
| Mounting Type | DIP |
| Brand | Harris Corporation |
| Part Number | TIP112 |
The TIP112 is a high-power NPN Darlington transistor with a maximum voltage rating of 100V and a current rating of up to 2A. Housed in a TO-220 package, this transistor is ideal for high-current switching applications, providing efficient performance in power amplification and control circuits. Its Darlington configuration offers a high current gain, making it suitable for driving larger loads with lower input current. The TIP112 is commonly used in power amplifiers, motor drivers, and switching power supplies, where higher current handling and efficiency are required. The transistor features a power dissipation of 2W, which allows it to operate effectively in various environments, provided appropriate heat sinking is used for higher current applications. Its robust construction ensures reliable operation in harsh conditions, and its through-hole mounting makes it easy to integrate into PCB designs. The TIP112 is widely used in automotive electronics, industrial control systems, and general-purpose applications where high current and voltage switching are needed.
Features:-
Additional Information:
Minimum Order Quantity: 1000 Piece
| Number Of Pins | 8 Pin |
The CD74HC40103E is an 8-bit binary counter IC designed for efficient counting applications in digital circuits. This IC features a single 8-bit binary counter element that increments on the negative edge of the clock signal, providing precise control over counting operations. It is part of the HC (High-Speed CMOS) family, which offers fast switching speeds and low power consumption compared to traditional CMOS devices. The CD74HC40103E is housed in a 16-pin PDIP (Plastic Dual In-line Package), which is ideal for through-hole mounting and integration into a wide range of circuit designs. This binary counter counts from 0 to 255 in binary and outputs the count on 8 parallel output pins. It operates with a wide voltage range (2V to 6V), making it compatible with a variety of logic families. The negative edge triggering ensures that the counter increments reliably on the falling edge of the clock, which is useful for synchronous applications requiring precise timing. The CD74HC40103E is commonly used in frequency dividers, event counters, digital clocks, and time-delay circuits, where its 8-bit output enables efficient counting and easy integration into larger systems.
Features :-
Additional Information:
Minimum Order Quantity: 1000 Piece
| Input Bits | 8 Bit |
| Number Of Pins | 14 Pin |
The CD74ACT151M96 is an 8-channel multiplexer IC that allows one of eight data inputs to be routed to a single output, based on a 3-bit binary selection signal. This multiplexer is part of the ACT (Advanced CMOS with TTL compatibility) family, which ensures high-speed performance, low power consumption, and compatibility with both TTL and CMOS logic systems. The 1 x 8:1 configuration means that the IC has one output and eight inputs, enabling efficient signal routing in digital systems. The CD74ACT151M96 features active-low enable (G) inputs, which allow for the control of the output based on external signals, ensuring it can be integrated seamlessly into larger logic systems. It operates within a supply voltage range of 4.5V to 5.5V and is housed in a 16-pin SOIC (Small Outline Integrated Circuit) package, making it ideal for compact, surface-mount designs. This IC is commonly used in applications such as data multiplexing, memory addressing, and signal routing.
Features :-
Additional Information: